Hello! These farmhouse blocks are super hot right now and you are probably wondering how you can make them too! Well I got all the details on how I make them in this post... so let's get started!
Links in this blog post may contain affiliate links. This does not mean it will cost you anymore, I just may receive a small commission for the referral.
What you need for this project!
3. Once the stain has dried, that is where the fun begins. You will rip the tape in half and place it around the block. This gives the block a ripped paper feel after painting.
6. You will then cut and weed the words, from HTV. Don't forget to mirror when cutting.
7. Time to pull out that Cricut mini press and press on your words! I use medium heat, press and keep the little press moving for about 3-4 seconds. Once the seconds are done, peel immediately, but slowly. If you find any part did not stick well enough press again. Use a Teflon Sheet, this is very important! I found without one the paint would melt as well as the HTV.
And there you are time to enjoy your DIY farmhouse blocks!
Don't have time to create this project now, pin to Pinterest for later! -or- If you DIYed these, tag me on IG (@kitaleigh.made) I would love to see!
Hello Friends! I am a lover of all things DIY and I hope you find something useful in all my short ramblings about DIYs, hand lettering and so much more!