Hey Friends! If you are reading this you are ready to laser all the things but you first need to know what to get! Well below is a list of my must-have supplies for laser cutting and engraving!
The links in this blog are affiliate links. This does not mean it will cost you any more, I just may receive commission from the referral.
3. Now that you have your Glowforge and everything to keep it clean. You need the basic materials and material prep items.
4. Now you are ready to laser away!
6. Last but not least stay safe friends.
Let me know in the comments below if you have any must have laser supplies or if you have any questions about mine!
Hello my laser loving and vinyl loving friends! I created this laser cut vinyl storage for all of the people looking for a storage solution that is not a bag holder.
What I love about this storage solution is that it has a low profile, sitting only about 3" off the wall! It is 18" tall and 5" wide with the holes being about 1.75". It can hold 10 vinyl rolls that are anywhere from 6" to 24+" wide.
Make multiple and hang together to make a seamless design. (I made two and have room for more!)
There are affiliate links listed below, they will not cost you anymore but I will receive a small commission for the referral.
Now that you have the file, let's get started!
What you need for this project:
Once you have it assembled, on to painting it! I chose a boring but functional grey! Next, I attached it (well had my husband attach it) to the wall with the screws.
And voilà..... time to add your unorganized vinyl and show off your creation!
What color did you paint yours? Comment below, I want to know!
So, I have been struggling with a good way to store my acrylic paints. I feel like they have always been a mess and extremely hard to find the colors I have. As you can see below, I have bought the same colors multiple times, not even meaning to.
So first I began by creating the file, if you will be just using my FREE file you can skip this part.
After all of my pieces were cut.
Whooo... you made it to the end! Now all that is left is to put your paint in and admire your work! Make one, two, or twenty!